I created a reimage DVD. When loading and perform the process, it fails to find files.

ISSUE

ISSUE: I created a reimage DVD. When loading and perform the process, it fails to find files.

RESOLUTION

RESOLUTION: You must burn the DVD using 4x or slower speeds to overcome the limitations in Hardware and the older ISO design. The image burning solution from Microsoft might not give you the best results. You can use a more customizable, but simple solution like using ImgBurn as it is free and fairly easy to use. 

How to Burn ISO using ImgBurn onto Optical Disc Media:
   - Open ImgBurn
   - Select Write image file to disc
   - Select ISO file that you would like to burn
   - Ensure write speed is at 4x or less (VERY IMPORTANT!)
   - Select Write
   - Allow Image to burn while following any on-screen instructions

CAUSE

CAUSE: This is a known issue with the older images, and the older series hardware with DVD drives.

NOTES

NOTE: The hardware in this case was an older 813-100 Recovery-Series appliance

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Contact us